Posted by Catalyst
— March 26, 2011 at 4:58 p.m. PDT
Want to put a new panel in your Mad Catz Tournament Edition FightStick, but not sure how to go about it? Well, AoBfrost did a helpful tutorial video showing how it's done. The action is sped up, making it a quick watch without skipping out on the important details.
There's also another tutorial, also by AoBfrost, showing how to swap out the artwork on your TE stick.
From experience, I don't recommend pulling on the quick disconnects with pliers as they may slip and you'll end up pulling on the wire. Instead, use a small flathead screw driver and pry the quick disconnects upwards until they loosen.
Also, don't try to press the tabs on the buttons to remove them unless you want to tear up your fingertips. Again, use the small flathead screw driver to push in the tabs.
Anybody know what it is I have to do to put my artwork on my TE stick? I heard something about going to Kinkos and having it laminated or w/e, but how would it have the adhesive on the other side. Any tips would be appreciated.
From experience, I don't recommend pulling on the quick disconnects with pliers as they may slip and you'll end up pulling on the wire. Instead, use a small flathead screw driver and pry the quick disconnects upwards until they loosen.